Tascam US122L su Ubuntu Gnome 13.04 - Jack non funziona

Avevo creato tempo fa questa guida per far funzionare correttamente la scheda audio TASCAM US122L su Ubuntu. Infatti funziona perfettamente su tutte le versioni di Ubuntu fino alla 12.10.
Ho installato in questi giorni Ubuntu Gnome 13.04 e purtroppo qui la guida non funziona. Quando avvio Jack dopo aver dato le stesse impostazioni che utilizzo da sempre mi da il seguente errore:

Codice:

09:57:06.620 Patchbay disattivato.
09:57:06.628 Resetta le statistiche.
09:57:06.701 Connessioni di ALSA cambiate.
09:57:07.015 D-BUS: Servizio disponibile (org.jackaudio.service aka jackdbus).
Cannot connect to server socket err = File o directory non esistente
Cannot connect to server request channel
jack server is not running or cannot be started
09:57:07.039 Cambiamento nel grafico delle connessioni di ALSA.
09:57:36.729 D-BUS: il server JACK non può essere avviato. Mi dispiace
Sat Mar 16 09:57:34 2013: Starting jack server...
Sat Mar 16 09:57:34 2013: JACK server starting in realtime mode with priority 10
Sat Mar 16 09:57:34 2013: ERROR: Cannot lock down 107335194 byte memory area (Cannot allocate memory)
Sat Mar 16 09:57:34 2013: Acquired audio card Audio3
Sat Mar 16 09:57:34 2013: creating alsa driver ... usb_stream:3|usb_stream:3|1024|2|48000|0|0|nomon|swmeter|-|32bit
Sat Mar 16 09:57:34 2013: Using ALSA driver USB US-122L running on card 3 - TASCAM US-122L (644:800e if 0 at 002/002)
Sat Mar 16 09:57:34 2013: configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods
Sat Mar 16 09:57:34 2013: ALSA: final selected sample format for capture: 24bit little-endian
Sat Mar 16 09:57:34 2013: ALSA: use 2 periods for capture
Cannot connect to server socket err = File o directory non esistente
Cannot connect to server request channel
jack server is not running or cannot be started
Sat Mar 16 09:57:36 2013: ERROR: ALSA: cannot set hardware parameters for capture
Sat Mar 16 09:57:36 2013: ERROR: ALSA: cannot configure capture channel
Sat Mar 16 09:57:36 2013: ERROR: Segmentation Fault!
Sat Mar 16 09:57:36 2013: ERROR: info.si_signo = 11
Sat Mar 16 09:57:36 2013: ERROR: info.si_errno = 0
Sat Mar 16 09:57:36 2013: ERROR: info.si_code = 1 (SEGV_MAPERR)
Sat Mar 16 09:57:36 2013: ERROR: info.si_addr = 0x13
Sat Mar 16 09:57:36 2013: ERROR: reg[00] = 0x00000033
Sat Mar 16 09:57:36 2013: ERROR: reg[01] = 0xc1600000
Sat Mar 16 09:57:36 2013: ERROR: reg[02] = 0xffff007b
Sat Mar 16 09:57:36 2013: ERROR: reg[03] = 0x0000007b
Sat Mar 16 09:57:36 2013: ERROR: reg[04] = 0x09095ea0
Sat Mar 16 09:57:36 2013: ERROR: reg[05] = 0xb71ed188
Sat Mar 16 09:57:36 2013: ERROR: reg[06] = 0x09096928
Sat Mar 16 09:57:36 2013: ERROR: reg[07] = 0xbfa4a690
Sat Mar 16 09:57:36 2013: ERROR: reg[08] = 0xb71ed000
Sat Mar 16 09:57:36 2013: ERROR: reg[09] = 0xffffffff
Sat Mar 16 09:57:36 2013: ERROR: reg[10] = 0xb71ed1a0
Sat Mar 16 09:57:36 2013: ERROR: reg[11] = 0x09095ea0
Sat Mar 16 09:57:36 2013: ERROR: reg[12] = 0x0000000e
Sat Mar 16 09:57:36 2013: ERROR: reg[13] = 0x00000004
Sat Mar 16 09:57:36 2013: ERROR: reg[14] = 0xb71ea2eb
Sat Mar 16 09:57:36 2013: ERROR: reg[15] = 0x00000073
Sat Mar 16 09:57:36 2013: ERROR: reg[16] = 0x00010286
Sat Mar 16 09:57:36 2013: ERROR: reg[17] = 0xbfa4a690
Sat Mar 16 09:57:36 2013: ERROR: reg[18] = 0x0000007b
Sat Mar 16 09:57:36 2013: ERROR: Stack trace:
Sat Mar 16 09:57:36 2013: ERROR: 1: 0xb71ea2eb <(null)+3072238315> (/usr/lib/i386-linux-gnu/alsa-lib/libasound_module_pcm_usb_stream.so)
Sat Mar 16 09:57:36 2013: ERROR: 2: 0xb71ead50 <(null)+3072240976> (/usr/lib/i386-linux-gnu/alsa-lib/libasound_module_pcm_usb_stream.so)
09:57:56.002 Non sono riuscito ad avviare JACK come client. - Operazione fallita. - Impossibile connettersi al server JACK. Controlla la finestra dei messaggi per maggiori informazioni.
Cannot connect to server socket err = File o directory non esistente
Cannot connect to server request channel
jack server is not running or cannot be started

L'errore principale che mi pare di trovare è un segmentation fault.
Comunque, IMHO, è impossibile sperare di ottenere un sistema perfrormate e pientamente funzionante su una distro che, se non sbaglio, deve ancora essere rilasciata!
Fai però benissimo a effettuare questi test, potresti contattare sia gli sviluppatori di Alsa che di Jack e segnalare loro questo errore, in modo che possano lavorarci sopra (o magari ti dicono che è un errore noto in attesa di una patch).

el_Felix ha scritto:L'errore principale che mi pare di trovare è un segmentation fault.
Comunque, IMHO, è impossibile sperare di ottenere un sistema perfrormate e pientamente funzionante su una distro che, se non sbaglio, deve ancora essere rilasciata!
Fai però benissimo a effettuare questi test, potresti contattare sia gli sviluppatori di Alsa che di Jack e segnalare loro questo errore, in modo che possano lavorarci sopra (o magari ti dicono che è un errore noto in attesa di una patch).

Ho installato Cadence e dopo un milione di tentativi nelle impostazioni Jack parte ma non entra e non esce comunque nessun suono.. Io li contatterei gli sviluppatori ma non so bene l'inglese a tal punto

Prepara la mail con tutto quello che vuoi scrivere, e te la traduco io! Mandami un MP o una mail a questo indirizzo: emiliano.felicissimo@gmail.com
Ah, intanto: con quali impostazioni di Jack sei riuscito a farlo partire? (anche se non esce suono, già il fatto che parte è qualcosa...)

el_Felix ha scritto:Prepara la mail con tutto quello che vuoi scrivere, e te la traduco io! Mandami un MP o una mail a questo indirizzo: emiliano.felicissimo@gmail.com
Ah, intanto: con quali impostazioni di Jack sei riuscito a farlo partire? (anche se non esce suono, già il fatto che parte è qualcosa...)

Grazie. Dopo la preparo.
Se avvio jack (uso qjackctl) mi da l'errore precedente.
Cadence, che gestisce tutti i server audio contemporaneamente, ho inserito in Device/interface la voce usb_stream:3 che è la stessa voce già inserita in jack e corrisponde alla mia Tascam.
Ho controllato come ho impostato il tutto su Ubuntu 12.04 in Cadence ed è che la stessa voce è inserita in input e output device. Solo che se metto quelle voci in cadence su Ubuntu 13.04 jack non parte.

Ci sono degli sviluppi in peggio. Ora anche con le impostazioni con cui ero riuscito a far avviare jack tramite cadence, non si avvia più. E non ho fatto nulla se non provare altre impostazioni.
Non è che sia un problema di kernel? Io ho visto che ho il kernel 3.8.0-12 generic. Ho cercato il corrispondente PAE ma non l'ho trovato. E comunque potrei provare ad installare un kernel meno recente per vedere se funziona?

Sono riuscito nuovamente a far avviare jack ma non c'è nessun risultato sonoro. Se avvio Ardour parte correttamente ma il microfono non da segni di vita.
ecco l'immagine di cadence e jack quando funzionano pur senza suono
Se provo a cambiare i parametri jack non parte. Su Ubuntu 12.04 i parametri sono usb_stream:3 sia in input che in output device.
Un'altra cosa come si può vedere nelle connessioni delle porte di uscita non c'è nulla mentre di solito c'era in entrambe system..

Purtroppo non so aiutarti, ma sono quasi completamente sicuro che dipenda da un problema di stabilità del nuovo kernel: come ti dicevo la 13.04 è una versione ancora in sviluppo e perciò non avrà tutti i moduli perfattemente funzionanti, soprattutto quelli riguardanti cose così particolari come la gestione dell'audio a bassa latenza con hardware dedicato.
Ho ricevuto il tuo messaggio, ti faccio sapere appena ho preparato la traduzione così contattiamo gli sviluppatori e speriamo possano fare qualcosa in merito!

La scheda viene riconosciuta correttamente da Alsa?
Posta l'output di:
- lsusb --vv
- cat /proc/asound/cards

Ciao,
Touch.

touchstyle ha scritto:La scheda viene riconosciuta correttamente da Alsa?
Posta l'output di:
- lsusb --vv
- cat /proc/asound/cards

Ciao,
Touch.

Adesso sono su Ubuntu 12.04 ma l'output comunque
cat /proc/asound/cards
me la riconosceva. Mi serviva quel comando per identificarla appunto e per aggiungere il numero nei parametri dell'interfaccia: usb_stream:3

Invece il primo comando che hai scritto non l'ho dato..

Posta anche l'output di "dmesg", così vediamo come si comporta il kernel, e visto che è gratis, posta anche "lsmod".

Ciao,
Touch.

PS:No ho compreso il sisgnificat di "Mi serviva quel comando per identificarla appunto e per aggiungere il numero nei parametri"....

touchstyle ha scritto:Posta anche l'output di "dmesg", così vediamo come si comporta il kernel, e visto che è gratis, posta anche "lsmod".

Ciao,
Touch.

PS:No ho compreso il sisgnificat di "Mi serviva quel comando per identificarla appunto e per aggiungere il numero nei parametri"....

Dmesg una lista lunghissima eccola:

Codice:

[    0.485105] io scheduler noop registered
[    0.485107] io scheduler deadline registered (default)
[    0.485114] io scheduler cfq registered
[    0.485268] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.485346] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.485431] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.485515] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.485590] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.485607] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.485681] intel_idle: does not run on family 6 model 15
[    0.485763] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.485768] ACPI: Power Button [PWRB]
[    0.485810] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.485813] ACPI: Power Button [PWRF]
[    0.485905] ACPI: Requesting acpi_cpufreq
[    0.490621] isapnp: Scanning for PnP cards...
[    0.490674] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.511104] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.512367] Linux agpgart interface v0.103
[    0.513800] brd: module loaded
[    0.514477] loop: module loaded
[    0.514592] ata_piix 0000:00:1f.2: version 2.13
[    0.514614] ata_piix 0000:00:1f.2: MAP [
[    0.514615]  P0 -- P1 -- ]
[    0.514656] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.514841] scsi0 : ata_piix
[    0.516018] scsi1 : ata_piix
[    0.516616] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    0.516619] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    0.516635] ata_piix 0000:00:1f.5: MAP [
[    0.516637]  P0 -- P1 -- ]
[    0.516671] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.516824] scsi2 : ata_piix
[    0.517353] scsi3 : ata_piix
[    0.517850] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    0.517853] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    0.518145] libphy: Fixed MDIO Bus: probed
[    0.518218] tun: Universal TUN/TAP device driver, 1.6
[    0.518220] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.518256] PPP generic driver version 2.4.2
[    0.518291] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.518294] ehci-pci: EHCI PCI platform driver
[    0.518315] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.518318] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.518324] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.518338] ehci-pci 0000:00:1a.7: debug port 1
[    0.522230] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.522245] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.532018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.532040] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.532043] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.532045] usb usb1: Product: EHCI Host Controller
[    0.532048] usb usb1: Manufacturer: Linux 3.8.0-12-generic ehci_hcd
[    0.532050] usb usb1: SerialNumber: 0000:00:1a.7
[    0.532160] hub 1-0:1.0: USB hub found
[    0.532165] hub 1-0:1.0: 6 ports detected
[    0.532293] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.532296] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.532301] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.532315] ehci-pci 0000:00:1d.7: debug port 1
[    0.536210] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.536224] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.548014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.548028] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.548031] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.548033] usb usb2: Product: EHCI Host Controller
[    0.548036] usb usb2: Manufacturer: Linux 3.8.0-12-generic ehci_hcd
[    0.548038] usb usb2: SerialNumber: 0000:00:1d.7
[    0.548123] hub 2-0:1.0: USB hub found
[    0.548127] hub 2-0:1.0: 6 ports detected
[    0.548245] ehci-platform: EHCI generic platform driver
[    0.548253] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.548271] uhci_hcd: USB Universal Host Controller Interface driver
[    0.548291] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.548294] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.548299] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.548329] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.548357] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.548359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.548362] usb usb3: Product: UHCI Host Controller
[    0.548364] usb usb3: Manufacturer: Linux 3.8.0-12-generic uhci_hcd
[    0.548366] usb usb3: SerialNumber: 0000:00:1a.0
[    0.548445] hub 3-0:1.0: USB hub found
[    0.548449] hub 3-0:1.0: 2 ports detected
[    0.548520] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.548524] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.548531] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.548560] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.548586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.548589] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.548591] usb usb4: Product: UHCI Host Controller
[    0.548594] usb usb4: Manufacturer: Linux 3.8.0-12-generic uhci_hcd
[    0.548596] usb usb4: SerialNumber: 0000:00:1a.1
[    0.548674] hub 4-0:1.0: USB hub found
[    0.548679] hub 4-0:1.0: 2 ports detected
[    0.548750] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.548753] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.548758] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.548778] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.548805] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.548808] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.548810] usb usb5: Product: UHCI Host Controller
[    0.548812] usb usb5: Manufacturer: Linux 3.8.0-12-generic uhci_hcd
[    0.548814] usb usb5: SerialNumber: 0000:00:1a.2
[    0.548892] hub 5-0:1.0: USB hub found
[    0.548896] hub 5-0:1.0: 2 ports detected
[    0.548968] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.548971] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.548976] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.548996] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.549023] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.549025] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.549028] usb usb6: Product: UHCI Host Controller
[    0.549030] usb usb6: Manufacturer: Linux 3.8.0-12-generic uhci_hcd
[    0.549032] usb usb6: SerialNumber: 0000:00:1d.0
[    0.549110] hub 6-0:1.0: USB hub found
[    0.549114] hub 6-0:1.0: 2 ports detected
[    0.549187] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.549190] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.549197] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.549228] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.549256] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.549259] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.549261] usb usb7: Product: UHCI Host Controller
[    0.549264] usb usb7: Manufacturer: Linux 3.8.0-12-generic uhci_hcd
[    0.549266] usb usb7: SerialNumber: 0000:00:1d.1
[    0.549344] hub 7-0:1.0: USB hub found
[    0.549348] hub 7-0:1.0: 2 ports detected
[    0.549419] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.549423] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.549428] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.549448] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.549475] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.549477] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.549480] usb usb8: Product: UHCI Host Controller
[    0.549482] usb usb8: Manufacturer: Linux 3.8.0-12-generic uhci_hcd
[    0.549484] usb usb8: SerialNumber: 0000:00:1d.2
[    0.549563] hub 8-0:1.0: USB hub found
[    0.549567] hub 8-0:1.0: 2 ports detected
[    0.549707] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.549709] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.550229] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.550310] mousedev: PS/2 mouse device common for all mice
[    0.550421] rtc_cmos 00:02: RTC can wake from S4
[    0.550522] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.550544] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.550645] device-mapper: uevent: version 1.0.3
[    0.550701] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    0.550730] EISA: Probing bus 0 at eisa.0
[    0.550736] Cannot allocate resource for EISA slot 1
[    0.550738] Cannot allocate resource for EISA slot 2
[    0.550756] EISA: Detected 0 cards.
[    0.550764] cpufreq-nforce2: No nForce2 chipset.
[    0.550767] cpuidle: using governor ladder
[    0.550768] cpuidle: using governor menu
[    0.550772] ledtrig-cpu: registered to indicate activity on CPUs
[    0.550774] EFI Variables Facility v0.08 2004-May-17
[    0.550915] ashmem: initialized
[    0.551039] TCP: cubic registered
[    0.551142] NET: Registered protocol family 10
[    0.551336] NET: Registered protocol family 17
[    0.551346] Key type dns_resolver registered
[    0.551498] Using IPI No-Shortcut mode
[    0.551562] Loading module verification certificates
[    0.555443] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 994303b493c5fe4d96e311b45c53fd83eb5b36b2'
[    0.555461] registered taskstats version 1
[    0.557894] Key type trusted registered
[    0.559811] Key type encrypted registered
[    0.562113] rtc_cmos 00:02: setting system clock to 2013-03-17 10:43:20 UTC (1363517000)
[    0.562389] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.562391] EDD information not available.
[    0.843444] isapnp: No Plug & Play device found
[    0.848137] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.854617] ata4: SATA link down (SStatus 0 SControl 300)
[    0.865217] ata3: SATA link down (SStatus 0 SControl 300)
[    1.004074] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.004179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.012505] ata2.00: ATA-8: WDC WD20EARS-22MVWB0, 51.0AB51, max UDMA/133
[    1.012510] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.019059] ata1.00: ATA-7: WDC WD5000AAJS-22TKA0, 12.01C01, max UDMA/133
[    1.019063] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.020346] ata2.00: configured for UDMA/133
[    1.032769] ata1.00: configured for UDMA/133
[    1.032933] scsi 0:0:0:0: Direct-Access    ATA      WDC WD5000AAJS-2 12.0 PQ: 0 ANSI: 5
[    1.033109] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.033135] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.033161] sd 0:0:0:0: [sda] Write Protect is off
[    1.033164] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.033187] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.033298] scsi 1:0:0:0: Direct-Access    ATA      WDC WD20EARS-22M 51.0 PQ: 0 ANSI: 5
[    1.033448] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.033467] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.033470] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.033517] sd 1:0:0:0: [sdb] Write Protect is off
[    1.033520] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.033554] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.040434]  sda: sda1
[    1.040702] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.085322]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 > sdb3
[    1.085780] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.085842] Freeing unused kernel memory: 780k freed
[    1.086102] Write protecting the kernel text: 6224k
[    1.086172] Write protecting the kernel read-only data: 2420k
[    1.086174] NX-protecting the kernel data: 4016k
[    1.098078] udevd[104]: starting version 175
[    1.112425] usb 1-1: New USB device found, idVendor=046d, idProduct=0990
[    1.112431] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    1.112434] usb 1-1: SerialNumber: 88DAA72D
[    1.169093] Disabling lock debugging due to kernel taint
[    1.173664] ahci 0000:03:00.0: version 3.0
[    1.189590] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    1.189596] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    1.190693] scsi4 : ahci
[    1.193907] scsi5 : ahci
[    1.193965] ata5: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    1.193969] ata6: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    1.199378] Floppy drive(s): fd0 is 1.44M
[    1.203473] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    1.203515] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.204096] atl1 0000:02:00.0: version 2.1.3
[    1.204454] scsi6 : pata_jmicron
[    1.204856] scsi7 : pata_jmicron
[    1.205105] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    1.205108] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    1.219773] FDC 0 is a post-1991 82077
[    1.252214] firewire_ohci 0000:05:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.460062] tsc: Refined TSC clocksource calibration: 2405.454 MHz
[    1.460069] Switching to clocksource tsc
[    1.512052] ata5: SATA link down (SStatus 0 SControl 300)
[    1.516049] ata6: SATA link down (SStatus 0 SControl 300)
[    1.540042] usb 1-6: new high-speed USB device number 5 using ehci-pci
[    1.697422] usb 1-6: New USB device found, idVendor=07d1, idProduct=3c0a
[    1.697428] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.697432] usb 1-6: Product: 11n Adapter
[    1.697436] usb 1-6: Manufacturer: Ralink
[    1.697439] usb 1-6: SerialNumber: 1.0
[    1.752159] firewire_core 0000:05:03.0: created device fw0: GUID 001e8c000012faad, S400
[    1.936059] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.113366] usb 3-2: New USB device found, idVendor=0603, idProduct=00f2
[    2.113372] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.113377] usb 3-2: Product: USB Keyboard
[    2.113380] usb 3-2: Manufacturer: NOVATEK
[    2.161659] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[    2.169010] usbcore: registered new interface driver usbhid
[    2.169014] usbhid: USB HID core driver
[    2.356067] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    2.547600] usb 4-1: New USB device found, idVendor=046d, idProduct=c066
[    2.547605] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.547610] usb 4-1: Product: G9x Laser Mouse
[    2.547613] usb 4-1: Manufacturer: Logitech
[    2.547617] usb 4-1: SerialNumber: BEFCE9BA640018
[  11.556124] Adding 3905532k swap on /dev/sdb5.  Priority:-1 extents:1 across:3905532k
[  11.565439] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  11.600553] udevd[352]: starting version 175
[  11.645340] lp: driver loaded but no devices found
[  11.801015] [drm] Initialized drm 1.1.0 20060810
[  11.916847] [drm] radeon defaulting to kernel modesetting.
[  11.916851] [drm] radeon kernel modesetting enabled.
[  11.917197] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x174B:0x1482).
[  11.917222] [drm] register mmio base: 0xFE8C0000
[  11.917224] [drm] register mmio size: 131072
[  11.917349] ATOM BIOS: JUNIPER
[  11.917374] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[  11.917377] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[  11.918871] [drm] Detected VRAM RAM=1024M, BAR=256M
[  11.918875] [drm] RAM width 128bits DDR
[  11.918948] [TTM] Zone  kernel: Available graphics memory: 426538 kiB
[  11.918950] [TTM] Zone highmem: Available graphics memory: 2066734 kiB
[  11.918951] [TTM] Initializing pool allocator
[  11.918957] [TTM] Initializing DMA pool allocator
[  11.918987] [drm] radeon: 1024M of VRAM memory ready
[  11.918989] [drm] radeon: 512M of GTT memory ready.
[  11.919010] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[  11.919012] [drm] Driver supports precise vblank timestamp query.
[  11.919055] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[  11.919066] radeon 0000:01:00.0: radeon: using MSI.
[  11.919092] [drm] radeon: irq initialized.
[  11.919097] [drm] GART: num cpu pages 131072, num gpu pages 131072
[  11.919861] [drm] probing gen 2 caps for device 8086:29c1 = 1/0
[  11.919915] [drm] Loading JUNIPER Microcode
[  11.991730] type=1400 audit(1363517011.925:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=623 comm="apparmor_parser"
[  11.992206] type=1400 audit(1363517011.929:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=623 comm="apparmor_parser"
[  11.992439] type=1400 audit(1363517011.929:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=623 comm="apparmor_parser"
[  12.033512] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[  12.033641] radeon 0000:01:00.0: WB enabled
[  12.033645] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffdc1c00
[  12.033648] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffdc1c0c
[  12.050028] Linux video capture interface: v2.00
[  12.061185] [drm] ring test on 0 succeeded in 0 usecs
[  12.061244] [drm] ring test on 3 succeeded in 1 usecs
[  12.061418] [drm] ib test on ring 0 succeeded in 0 usecs
[  12.061437] [drm] ib test on ring 3 succeeded in 0 usecs
[  12.064246] [drm] Radeon Display Connectors
[  12.064249] [drm] Connector 0:
[  12.064251] [drm]  DP-1
[  12.064253] [drm]  HPD4
[  12.064255] [drm]  DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[  12.064257] [drm]  Encoders:
[  12.064258] [drm]    DFP1: INTERNAL_UNIPHY2
[  12.064260] [drm] Connector 1:
[  12.064262] [drm]  HDMI-A-1
[  12.064263] [drm]  HPD5
[  12.064265] [drm]  DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[  12.064267] [drm]  Encoders:
[  12.064268] [drm]    DFP2: INTERNAL_UNIPHY2
[  12.064270] [drm] Connector 2:
[  12.064272] [drm]  DVI-I-1
[  12.064273] [drm]  HPD1
[  12.064275] [drm]  DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[  12.064277] [drm]  Encoders:
[  12.064278] [drm]    DFP3: INTERNAL_UNIPHY1
[  12.064280] [drm]    CRT2: INTERNAL_KLDSCP_DAC2
[  12.064281] [drm] Connector 3:
[  12.064283] [drm]  DVI-I-2
[  12.064284] [drm]  HPD6
[  12.064286] [drm]  DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[  12.064288] [drm]  Encoders:
[  12.064289] [drm]    DFP4: INTERNAL_UNIPHY
[  12.064291] [drm]    CRT1: INTERNAL_KLDSCP_DAC1
[  12.064332] [drm] Internal thermal controller with fan control
[  12.064527] [drm] radeon: power management initialized
[  12.099896] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[  12.105552] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[  12.105835] hid-generic 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1a.0-2/input0
[  12.160779] [drm] fb mappable at 0xD0142000
[  12.160783] [drm] vram apper at 0xD0000000
[  12.160785] [drm] size 8294400
[  12.160787] [drm] fb depth is 24
[  12.160788] [drm]    pitch is 7680
[  12.165584] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
[  12.165880] hid-generic 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1a.0-2/input1
[  12.166421] input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4
[  12.166593] hid-generic 0003:046D:C066.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:1a.1-1/input0
[  12.167551] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[  12.167653] fbcon: radeondrmfb (fb0) is primary device
[  12.168302] skipping empty audio interface (v1)
[  12.168309] snd-usb-audio: probe of 1-1:1.0 failed with error -5
[  12.168319] skipping empty audio interface (v1)
[  12.168322] snd-usb-audio: probe of 1-1:1.1 failed with error -5
[  12.180535] input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input5
[  12.180745] hid-generic 0003:046D:C066.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:1a.1-1/input1
[  12.300957] gpio_ich: GPIO from 195 to 255 on gpio_ich
[  12.306361] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[  12.314845] cfg80211: Calling CRDA to update world regulatory domain
[  12.325132] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[  12.325321] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[  12.367229] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[  12.367312] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[  12.367376] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  12.367442] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  12.367505] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  12.367773] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  12.367847] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  12.380787] Console: switching to colour frame buffer device 240x67
[  12.388190] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[  12.388191] radeon 0000:01:00.0: registered panic notifier
[  12.388200] [drm] Initialized radeon 2.29.0 20080528 for 0000:01:00.0 on minor 0
[  12.388253] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[  12.388318] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[  12.411280] cfg80211: World regulatory domain updated:
[  12.411285] cfg80211:  (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  12.411287] cfg80211:  (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.411290] cfg80211:  (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  12.411292] cfg80211:  (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  12.411294] cfg80211:  (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.411296] cfg80211:  (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.412420] coretemp coretemp.0: Using relative temperature scale!
[  12.412439] coretemp coretemp.0: Using relative temperature scale!
[  12.414053] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[  12.421733] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[  12.421774] usbcore: registered new interface driver snd-usb-audio
[  12.439601] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input15
[  12.440334] usbcore: registered new interface driver uvcvideo
[  12.440335] USB Video Class driver (1.1.1)
[  12.476119] usb 1-6: reset high-speed USB device number 5 using ehci-pci
[  12.478085] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[  12.642790] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  12.643129] usbcore: registered new interface driver rt2800usb
[  12.853453] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[  13.356888] init: failsafe main process (902) killed by TERM signal
[  13.649404] Bluetooth: Core ver 2.16
[  13.649445] NET: Registered protocol family 31
[  13.649447] Bluetooth: HCI device and connection manager initialized
[  13.649627] Bluetooth: HCI socket layer initialized
[  13.649631] Bluetooth: L2CAP socket layer initialized
[  13.649638] Bluetooth: SCO socket layer initialized
[  13.658027] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  13.658031] Bluetooth: BNEP filters: protocol multicast
[  13.658036] Bluetooth: BNEP socket layer initialized
[  13.716045] Bluetooth: RFCOMM TTY layer initialized
[  13.716060] Bluetooth: RFCOMM socket layer initialized
[  13.716062] Bluetooth: RFCOMM ver 1.11
[  13.770622] ppdev: user-space parallel port driver
[  13.789750] type=1400 audit(1363517013.725:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser"
[  13.790246] type=1400 audit(1363517013.725:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser"
[  15.727132] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  15.728237] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  15.732677] atl1 0000:02:00.0: irq 47 for MSI/MSI-X
[  15.732788] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  15.733125] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  15.870934] type=1400 audit(1363517015.805:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1048 comm="apparmor_parser"
[  15.871384] type=1400 audit(1363517015.805:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1048 comm="apparmor_parser"
[  15.871621] type=1400 audit(1363517015.805:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1048 comm="apparmor_parser"
[  15.877307] type=1400 audit(1363517015.813:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1049 comm="apparmor_parser"
[  15.877848] type=1400 audit(1363517015.813:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1051 comm="apparmor_parser"
[  18.696962] wlan0: authenticate with 00:23:69:7f:cf:b5
[  18.724566] wlan0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[  18.759601] wlan0: send auth to 00:23:69:7f:cf:b5 (try 1/3)
[  18.761188] wlan0: authenticated
[  18.764048] wlan0: associate with 00:23:69:7f:cf:b5 (try 1/3)
[  18.768312] wlan0: RX AssocResp from 00:23:69:7f:cf:b5 (capab=0x431 status=0 aid=1)
[  18.780927] wlan0: associated
[  18.780973] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  408.644071] usb 2-1: new high-speed USB device number 2 using ehci-pci
[  408.776503] usb 2-1: config 1 interface 1 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 9
[  408.776997] usb 2-1: New USB device found, idVendor=0644, idProduct=800e
[  408.777002] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  408.777006] usb 2-1: Product: US-122L
[  408.777010] usb 2-1: Manufacturer: TASCAM
[  408.777013] usb 2-1: SerialNumber: no serial number
[  410.232356] usbcore: registered new interface driver snd-usb-us122l


Ecco lsmod

Codice:

Module                  Size  Used by
snd_usb_us122l        22429  0
parport_pc            31968  0
ppdev                  12817  0
rfcomm                37420  0
bnep                  17669  2
bluetooth            202069  10 bnep,rfcomm
binfmt_misc            17260  1
arc4                  12543  2
snd_hda_codec_hdmi    36052  1
coretemp              13131  0
kvm_intel            126842  0
rt2800usb              22366  0
kvm                  376505  1 kvm_intel
rt2x00usb              19979  1 rt2800usb
rt2800lib              60947  1 rt2800usb
rt2x00lib              48522  3 rt2x00usb,rt2800lib,rt2800usb
mac80211              526481  3 rt2x00lib,rt2x00usb,rt2800lib
joydev                17097  0
cfg80211              436177  2 mac80211,rt2x00lib
gpio_ich              13236  0
crc_ccitt              12627  1 rt2800lib
uvcvideo              71279  0
snd_hda_codec_realtek    63791  1
videobuf2_vmalloc      12920  1 uvcvideo
videobuf2_memops      13042  1 videobuf2_vmalloc
snd_usb_audio        114886  0
snd_hda_intel          38307  0
snd_usbmidi_lib        24210  2 snd_usb_audio,snd_usb_us122l
hid_generic            12484  0
snd_hda_codec        117303  3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
videobuf2_core        39161  1 uvcvideo
snd_hwdep              13272  3 snd_usb_audio,snd_usb_us122l,snd_hda_codec
microcode              18286  0
snd_pcm                80890  4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
videodev              95806  2 uvcvideo,videobuf2_core
snd_page_alloc        14230  2 snd_pcm,snd_hda_intel
serio_raw              13031  0
snd_seq_midi          13132  0
snd_seq_midi_event    14475  1 snd_seq_midi
snd_rawmidi            25114  2 snd_usbmidi_lib,snd_seq_midi
radeon                870822  3
ttm                    71289  1 radeon
asus_atk0110          17390  0
snd_seq                51280  2 snd_seq_midi_event,snd_seq_midi
drm_kms_helper        47545  1 radeon
drm                  228750  5 ttm,drm_kms_helper,radeon
snd_seq_device        14137  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              24411  2 snd_pcm,snd_seq
lpc_ich                16925  0
snd                    56485  13 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_usb_us122l,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
mac_hid                13037  0
i2c_algo_bit          13197  1 radeon
soundcore              12600  1 snd
lp                    13299  0
parport                40753  3 lp,ppdev,parport_pc
usbhid                41805  0
hid                    82666  2 hid_generic,usbhid
pata_acpi              12886  0
pata_jmicron          12662  0
atl1                  35479  0
floppy                55441  0
firewire_ohci          35292  0
firewire_core          61718  1 firewire_ohci
ahci                  25507  0
libahci                26108  1 ahci
crc_itu_t              12627  1 firewire_core


A una prima occhiata del dmesg sembrerebbe che il kernel abbia rilevato correttamente l'interfaccia.
Ma a che tipo di porta USB è collegata? è un Hub esterno?
In lsmod non mi sembra di vedere però, nella lista dei driver caricati, proprio snd_usb_us122l, che è quello in questione (nonostante dmesg dice che il kernel l'abbia creato e ci sono parecchi moduli che lo usano). Però potrei anche essermelo perso. Fa una cosa, rilancia lsmod in questo modo.

Codice:

lsmod | grep ^snd_usb_us122l

e posta il risultato.

Il modulo sembra essere caricato correttamente, solo che non lo vedo collegato a snd_pcm:

Codice:

snd_pcm                80890  4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel

Dovresti fare dei confronti tra gli output dei comandi (dmesg / lsmod) tra la 12.04 e 13.04, anche se aspettare la release finale non è una brutta idea...
Altra cosa: noti differenze se avvii il pc con scheda scollegata?
Altra cosa pt-2: hai provato a disabilitare la scheda interna dal BIOS?

Ciao,
Touch.

el_Felix ha scritto:A una prima occhiata del dmesg sembrerebbe che il kernel abbia rilevato correttamente l'interfaccia.
Ma a che tipo di porta USB è collegata? è un Hub esterno?
In lsmod non mi sembra di vedere però, nella lista dei driver caricati, proprio snd_usb_us122l, che è quello in questione (nonostante dmesg dice che il kernel l'abbia creato e ci sono parecchi moduli che lo usano). Però potrei anche essermelo perso. Fa una cosa, rilancia lsmod in questo modo.

Codice:

lsmod | grep ^snd_usb_us122l

e posta il risultato.

Eccolo:

Codice:

snd_usb_us122l        22429  0

touchstyle ha scritto:Il modulo sembra essere caricato correttamente, solo che non lo vedo collegato a snd_pcm:

Codice:

snd_pcm                80890  4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel

Dovresti fare dei confronti tra gli output dei comandi (dmesg / lsmod) tra la 12.04 e 13.04, anche se aspettare la release finale non è una brutta idea...
Altra cosa: noti differenze se avvii il pc con scheda scollegata?
Altra cosa pt-2: hai provato a disabilitare la scheda interna dal BIOS?

Ciao,
Touch.

Sulla 12.04 ecco i risultati:
DMESG

Codice:


[    0.293950] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.293954] ACPI: Power Button [PWRF]
[    0.295545] ERST: Table is not found!
[    0.295547] GHES: HEST is not enabled!
[    0.295638] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.304119] isapnp: Scanning for PnP cards...
[    0.315992] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.594490] Freeing initrd memory: 20104k freed
[    0.656966] isapnp: No Plug & Play device found
[    0.736635] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.752439] Linux agpgart interface v0.103
[    0.754248] brd: module loaded
[    0.755072] loop: module loaded
[    0.755227] ahci 0000:03:00.0: version 3.0
[    0.755243] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.768058] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.768064] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    0.768071] ahci 0000:03:00.0: setting latency timer to 64
[    0.768517] scsi0 : ahci
[    0.768613] scsi1 : ahci
[    0.768711] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[    0.768715] ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[    0.768774] ata_piix 0000:00:1f.2: version 2.13
[    0.768791] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.768796] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    0.768837] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.769072] scsi2 : ata_piix
[    0.769155] scsi3 : ata_piix
[    0.770351] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    0.770355] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    0.770387] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    0.770393] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.770439] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.770664] scsi4 : ata_piix
[    0.770742] scsi5 : ata_piix
[    0.771721] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    0.771725] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    0.771795] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[    0.771802] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.771835] pata_acpi 0000:03:00.1: setting latency timer to 64
[    0.771849] pata_acpi 0000:03:00.1: PCI INT B disabled
[    0.772219] Fixed MDIO Bus: probed
[    0.772240] tun: Universal TUN/TAP device driver, 1.6
[    0.772242] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.772303] PPP generic driver version 2.4.2
[    0.772413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.772429] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.772441] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.772445] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.772491] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.772517] ehci_hcd 0000:00:1a.7: debug port 1
[    0.776406] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.776421] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.792027] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.792219] hub 1-0:1.0: USB hub found
[    0.792226] hub 1-0:1.0: 6 ports detected
[    0.792323] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.792334] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.792337] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.792384] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.792407] ehci_hcd 0000:00:1d.7: debug port 1
[    0.796302] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.796316] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.812046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.812215] hub 2-0:1.0: USB hub found
[    0.812221] hub 2-0:1.0: 6 ports detected
[    0.812324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.812339] uhci_hcd: USB Universal Host Controller Interface driver
[    0.812357] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.812364] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.812367] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.812415] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.812436] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.812568] hub 3-0:1.0: USB hub found
[    0.812572] hub 3-0:1.0: 2 ports detected
[    0.812640] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.812646] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.812649] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.812698] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.812728] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.812856] hub 4-0:1.0: USB hub found
[    0.812859] hub 4-0:1.0: 2 ports detected
[    0.812926] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.812932] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.812935] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.812979] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.813000] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.813129] hub 5-0:1.0: USB hub found
[    0.813133] hub 5-0:1.0: 2 ports detected
[    0.813200] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.813206] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.813210] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.813255] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.813276] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.813400] hub 6-0:1.0: USB hub found
[    0.813404] hub 6-0:1.0: 2 ports detected
[    0.813471] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.813477] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.813480] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.813526] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.813556] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.813687] hub 7-0:1.0: USB hub found
[    0.813691] hub 7-0:1.0: 2 ports detected
[    0.813760] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.813767] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.813770] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.813813] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.813834] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.813960] hub 8-0:1.0: USB hub found
[    0.813964] hub 8-0:1.0: 2 ports detected
[    0.814086] usbcore: registered new interface driver libusual
[    0.814141] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.814143] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.814703] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.814813] mousedev: PS/2 mouse device common for all mice
[    0.814969] rtc_cmos 00:03: RTC can wake from S4
[    0.815079] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.815101] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.815156] device-mapper: uevent: version 1.0.3
[    0.815232] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    0.815268] EISA: Probing bus 0 at eisa.0
[    0.815272] Cannot allocate resource for EISA slot 1
[    0.815274] Cannot allocate resource for EISA slot 2
[    0.815291] EISA: Detected 0 cards.
[    0.815302] cpufreq-nforce2: No nForce2 chipset.
[    0.815304] cpuidle: using governor ladder
[    0.815306] cpuidle: using governor menu
[    0.815308] EFI Variables Facility v0.08 2004-May-17
[    0.815573] TCP cubic registered
[    0.815693] NET: Registered protocol family 10
[    0.816284] NET: Registered protocol family 17
[    0.816289] Registering the dns_resolver key type
[    0.816307] Using IPI No-Shortcut mode
[    0.816420] PM: Hibernation image not present or could not be loaded.
[    0.816432] registered taskstats version 1
[    0.831207]  Magic number: 5:424:837
[    0.831303] rtc_cmos 00:03: setting system clock to 2013-03-17 13:48:18 UTC (1363528098)
[    0.831596] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.831598] EDD information not available.
[    1.096143] ata1: SATA link down (SStatus 0 SControl 300)
[    1.096180] ata2: SATA link down (SStatus 0 SControl 300)
[    1.098608] ata6: SATA link down (SStatus 0 SControl 300)
[    1.109201] ata5: SATA link down (SStatus 0 SControl 300)
[    1.109205] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.244071] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.244175] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.248086] Refined TSC clocksource calibration: 2405.454 MHz.
[    1.248093] Switching to clocksource tsc
[    1.252902] ata4.00: ATA-8: WDC WD20EARS-22MVWB0, 51.0AB51, max UDMA/133
[    1.252906] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.260931] ata4.00: configured for UDMA/133
[    1.262866] ata3.00: ATA-7: WDC WD5000AAJS-22TKA0, 12.01C01, max UDMA/133
[    1.262870] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.276540] ata3.00: configured for UDMA/133
[    1.276705] scsi 2:0:0:0: Direct-Access    ATA      WDC WD5000AAJS-2 12.0 PQ: 0 ANSI: 5
[    1.276863] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.276907] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    1.276929] sd 2:0:0:0: [sda] Write Protect is off
[    1.276932] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.276954] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.277040] scsi 3:0:0:0: Direct-Access    ATA      WDC WD20EARS-22M 51.0 PQ: 0 ANSI: 5
[    1.277174] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.277250] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    1.277253] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.277322] sd 3:0:0:0: [sdb] Write Protect is off
[    1.277325] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.277354] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.284227]  sda: sda1
[    1.284509] sd 2:0:0:0: [sda] Attached SCSI disk
[    1.337964]  sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 > sdb3
[    1.338478] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.338546] Freeing unused kernel memory: 740k freed
[    1.338785] Write protecting the kernel text: 5816k
[    1.338803] Write protecting the kernel read-only data: 2376k
[    1.338804] NX-protecting the kernel data: 4424k
[    1.355500] zram: module is from the staging directory, the quality is unknown, you have been warned.
[    1.355722] zram: num_devices not specified. Using default: 1
[    1.355724] zram: Creating 1 devices ...
[    1.359210] udevd[104]: starting version 175
[    1.450136] Floppy drive(s): fd0 is 1.44M
[    1.454430] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.454466] pata_jmicron 0000:03:00.1: setting latency timer to 64
[    1.455366] scsi6 : pata_jmicron
[    1.457786] scsi7 : pata_jmicron
[    1.458430] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    1.458433] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    1.459040] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.459050] atl1 0000:02:00.0: setting latency timer to 64
[    1.460149] atl1 0000:02:00.0: version 2.1.3
[    1.468152] FDC 0 is a post-1991 82077
[    1.475946] Adding 2062124k swap on /dev/zram0.  Priority:100 extents:1 across:2062124k SS
[    1.652022] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[    1.780851] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.844079] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[    2.036036] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[    2.233994] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input2
[    2.234090] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:1a.0-2/input0
[    2.270555] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input3
[    2.270738] generic-usb 0003:0603:00F2.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1a.0-2/input1
[    2.270752] usbcore: registered new interface driver usbhid
[    2.270754] usbhid: USB HID core driver
[    2.344136] firewire_core: created device fw0: GUID 001e8c000012faad, S400
[    2.456033] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    2.657283] input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input4
[    2.657408] generic-usb 0003:046D:C066.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech G9x Laser Mouse] on usb-0000:00:1a.1-1/input0
[    2.667930] input: Logitech G9x Laser Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/input/input5
[    2.668064] generic-usb 0003:046D:C066.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Logitech G9x Laser Mouse] on usb-0000:00:1a.1-1/input1
[    3.267030] Btrfs loaded
[    3.272437] xor: automatically using best checksumming function: pIII_sse
[    3.292004]    pIII_sse  :  8548.000 MB/sec
[    3.292006] xor: using function: pIII_sse (8548.000 MB/sec)
[    3.292537] device-mapper: dm-raid45: initialized v0.2594b
[  16.044570] end_request: I/O error, dev fd0, sector 0
[  21.967963] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[  31.700866] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  31.719972] udevd[426]: starting version 175
[  31.746108] lp: driver loaded but no devices found
[  31.752011] scsi8 : vhba
[  31.863368] Adding 3905532k swap on /dev/sdb5.  Priority:-1 extents:1 across:3905532k
[  31.961850] device-mapper: multipath: version 1.3.0 loaded
[  31.979171] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[  31.979228] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[  31.979253] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[  32.027848] hda_codec: ALC883: BIOS auto-probing.
[  32.054142] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[  32.055809] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[  32.056123] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[  32.057383] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[  32.060679] type=1400 audit(1363524529.728:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=619 comm="apparmor_parser"
[  32.061075] type=1400 audit(1363524529.728:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=619 comm="apparmor_parser"
[  32.061304] type=1400 audit(1363524529.728:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=619 comm="apparmor_parser"
[  32.065245] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  32.066236] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  32.069611] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  32.073247] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  32.103849] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[  32.103915] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[  32.103939] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[  32.131395] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[  32.131550] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[  32.215162] Linux video capture interface: v2.00
[  32.215701] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990)
[  32.245844] input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input15
[  32.245973] usbcore: registered new interface driver uvcvideo
[  32.245975] USB Video Class driver (1.1.1)
[  32.250288] usbcore: registered new interface driver snd-usb-audio
[  32.329950] cfg80211: Calling CRDA to update world regulatory domain
[  32.350942] cfg80211: World regulatory domain updated:
[  32.350948] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  32.350951] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.350953] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  32.350956] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  32.350958] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.350961] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.360881] EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[  32.460042] usb 1-6: reset high-speed USB device number 5 using ehci_hcd
[  32.616289] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[  32.616295] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616298] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[  32.616302] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616305] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[  32.616309] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616313] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[  32.616316] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616320] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[  32.616323] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616327] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[  32.616331] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616334] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[  32.616338] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616341] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[  32.616345] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616348] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[  32.616352] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616355] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[  32.616359] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616362] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[  32.616366] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  32.616369] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[  32.616373] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  32.616376] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[  32.616380] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  32.616383] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[  32.616387] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  32.619662] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[  32.620332] Registered led device: rt2800usb-phy0::radio
[  32.620356] Registered led device: rt2800usb-phy0::assoc
[  32.620377] Registered led device: rt2800usb-phy0::quality
[  32.620412] usbcore: registered new interface driver rt2800usb
[  33.310225] init: udev-fallback-graphics main process (1158) terminated with status 1
[  33.819753] init: failsafe main process (1192) killed by TERM signal
[  33.901582] Bluetooth: Core ver 2.16
[  33.901606] NET: Registered protocol family 31
[  33.901608] Bluetooth: HCI device and connection manager initialized
[  33.901611] Bluetooth: HCI socket layer initialized
[  33.901613] Bluetooth: L2CAP socket layer initialized
[  33.901673] Bluetooth: SCO socket layer initialized
[  33.906449] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  33.906452] Bluetooth: BNEP filters: protocol multicast
[  33.907902] Bluetooth: RFCOMM TTY layer initialized
[  33.907907] Bluetooth: RFCOMM socket layer initialized
[  33.907909] Bluetooth: RFCOMM ver 1.11
[  33.908232] ppdev: user-space parallel port driver
[  33.920624] type=1400 audit(1363524531.588:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1268 comm="apparmor_parser"
[  33.921110] type=1400 audit(1363524531.588:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1268 comm="apparmor_parser"
[  34.025927] type=1400 audit(1363524531.692:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1303 comm="apparmor_parser"
[  34.032652] type=1400 audit(1363524531.700:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1304 comm="apparmor_parser"
[  34.033063] type=1400 audit(1363524531.700:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1304 comm="apparmor_parser"
[  34.033292] type=1400 audit(1363524531.700:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1304 comm="apparmor_parser"
[  34.037672] type=1400 audit(1363524531.704:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1307 comm="apparmor_parser"
[  34.248196] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  34.248469] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  34.250709] atl1 0000:02:00.0: irq 46 for MSI/MSI-X
[  34.250904] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  34.251154] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  34.874672] /dev/vmmon[1416]: Module vmmon: registered with major=10 minor=165
[  34.874677] /dev/vmmon[1416]: Module vmmon: initialized
[  34.881463] [1423]: VMCI: shared components initialized.
[  34.881504] [1423]: VMCI: host components initialized.
[  34.881565] [1423]: VMCI: Module registered (name=vmci,major=10,minor=56).
[  34.881567] [1423]: VMCI: Using host personality
[  34.881569] [1423]: VMCI: Module (name=vmci) is initialized
[  35.197830] /dev/vmnet: open called by PID 1500 (vmnet-bridge)
[  35.197837] /dev/vmnet: hub 0 does not exist, allocating memory.
[  35.197856] /dev/vmnet: port on hub 0 successfully opened
[  35.197865] bridge-eth0: up
[  35.197869] bridge-eth0: attached
[  35.208066] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[  35.208070] Disabling lock debugging due to kernel taint
[  35.458832] [fglrx] Maximum main memory to use for locked dma buffers: 3864 MBytes.
[  35.459051] [fglrx]  vendor: 1002 device: 68b8 count: 1
[  35.459682] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[  35.459695] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[  35.459700] pci 0000:01:00.0: setting latency timer to 64
[  35.460171] [fglrx] Kernel PAT support is enabled
[  35.460189] [fglrx] module loaded - fglrx 9.0.2 [Sep 28 2012] with 1 minors
[  35.643875] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[  35.644966] [fglrx] Firegl kernel thread PID: 1509
[  35.645074] [fglrx] Firegl kernel thread PID: 1510
[  35.645180] [fglrx] Firegl kernel thread PID: 1511
[  35.645313] [fglrx] IRQ 47 Enabled
[  35.669703] [fglrx] Gart USWC size:1260 M.
[  35.669706] [fglrx] Gart cacheable size:499 M.
[  35.669711] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[  35.669713] [fglrx] Reserved FB block: Unshared offset:f90c000, size:3f4000
[  35.669716] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[  35.720018] /dev/vmnet: open called by PID 1513 (vmnet-netifup)
[  35.720027] /dev/vmnet: hub 1 does not exist, allocating memory.
[  35.720045] /dev/vmnet: port on hub 1 successfully opened
[  35.815871] /dev/vmnet: open called by PID 1518 (vmnet-dhcpd)
[  35.815883] /dev/vmnet: port on hub 1 successfully opened
[  35.819682] /dev/vmnet: open called by PID 1522 (vmnet-natd)
[  35.819691] /dev/vmnet: hub 8 does not exist, allocating memory.
[  35.819710] /dev/vmnet: port on hub 8 successfully opened
[  35.822081] /dev/vmnet: open called by PID 1523 (vmnet-netifup)
[  35.822090] /dev/vmnet: port on hub 8 successfully opened
[  35.830371] userif-3: sent link down event.
[  35.830374] userif-3: sent link up event.
[  35.888779] /dev/vmnet: open called by PID 1528 (vmnet-dhcpd)
[  35.888791] /dev/vmnet: port on hub 8 successfully opened
[  36.021466] vboxdrv: Found 2 processor cores.
[  36.021601] vboxdrv: fAsync=0 offMin=0x3e7 offMax=0xbd9
[  36.021668] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[  36.021670] vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
[  36.232156] vboxpci: IOMMU not found (not registered)
[  37.447734] init: plymouth-stop pre-start process (2422) terminated with status 1
[  37.536987] wlan0: authenticate with 00:23:69:7f:cf:b5 (try 1)
[  37.538375] wlan0: authenticated
[  37.557363] wlan0: associate with 00:23:69:7f:cf:b5 (try 1)
[  37.560877] wlan0: RX AssocResp from 00:23:69:7f:cf:b5 (capab=0x431 status=0 aid=1)
[  37.560882] wlan0: associated
[  37.587737] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  37.795728] userif-3: sent link down event.
[  37.795732] userif-3: sent link up event.
[  38.703494] bridge-eth0: disabling the bridge on dev down
[  38.703514] bridge-eth0: down
[  38.703520] bridge-eth0: detached
[  38.703546] /dev/vmnet: open called by PID 1500 (vmnet-bridge)
[  38.703554] /dev/vmnet: hub 0 does not exist, allocating memory.
[  38.703572] /dev/vmnet: port on hub 0 successfully opened
[  38.703580] bridge-wlan0: device is wireless, enabling SMAC
[  38.703583] bridge-wlan0: up
[  38.703585] bridge-wlan0: attached
[  38.903277] userif-3: sent link down event.
[  38.903281] userif-3: sent link up event.
[  46.036010] vmnet8: no IPv6 routers present
[  46.656027] vmnet1: no IPv6 routers present
[  48.056012] wlan0: no IPv6 routers present
[  48.872022] /dev/vmmon[0]: HostIFReadUptimeWork: detected settimeofday: fixed uptimeBase old 18445380549177008236 new 18445380545577372107 attempts 1
[  92.876020] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[  93.008605] usb 2-1: config 1 interface 1 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 9
[  94.720077] usbcore: registered new interface driver snd-usb-us122l
[  98.845208] audit_printk_skb: 42 callbacks suppressed
[  98.845211] type=1701 audit(1363528196.147:26): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=4231 comm="chrome" reason="seccomp" sig=0 syscall=20 ip=0xb377d424 code=0x50001
[  104.788982] type=1701 audit(1363528202.091:27): auid=4294967295 uid=1000 gid=1000 ses=4294967295 pid=4495 comm="chrome" reason="seccomp" sig=0 syscall=20 ip=0xb37bf424 code=0x50001



LSMOD

Codice:

Module                  Size  Used by
snd_usb_us122l        22524  0
snd_hrtimer            12648  1
pci_stub              12550  1
vboxpci                22882  0
vboxnetadp            25616  0
vboxnetflt            27211  0
vboxdrv              285011  3 vboxpci,vboxnetadp,vboxnetflt
fglrx                4324143  139
vmnet                  50354  13
vsock                  47098  0
vmci                  80372  1 vsock
vmmon                  69896  0
parport_pc            32114  0
rfcomm                38139  0
bnep                  17830  2
ppdev                  12849  0
bluetooth            158438  10 rfcomm,bnep
binfmt_misc            17292  1
dm_crypt              22528  0
arc4                  12473  2
rt2800usb              22300  0
rt2800lib              53264  1 rt2800usb
crc_ccitt              12595  1 rt2800lib
rt2x00usb              20061  1 rt2800usb
rt2x00lib              48805  3 rt2800usb,rt2800lib,rt2x00usb
mac80211              436455  3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211              178679  2 rt2x00lib,mac80211
joydev                17393  0
snd_usb_audio        101566  0
uvcvideo              67203  0
videodev              86588  1 uvcvideo
snd_usbmidi_lib        24603  2 snd_usb_us122l,snd_usb_audio
snd_hda_codec_hdmi    31775  1
snd_hda_codec_realtek  174222  1
snd_seq_midi          13132  0
snd_rawmidi            25424  2 snd_usbmidi_lib,snd_seq_midi
snd_hda_intel          32765  0
snd_hda_codec        109562  3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep              13276  3 snd_usb_us122l,snd_usb_audio,snd_hda_codec
snd_pcm                80845  4 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
dm_multipath          22710  0
serio_raw              13027  0
snd_seq_midi_event    14475  1 snd_seq_midi
snd_seq                51567  3 snd_seq_midi,snd_seq_midi_event
snd_timer              28931  3 snd_hrtimer,snd_pcm,snd_seq
snd_seq_device        14172  3 snd_seq_midi,snd_rawmidi,snd_seq
asus_atk0110          17742  0
snd                    62064  14 snd_usb_us122l,snd_usb_audio,snd_usbmidi_lib,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
mac_hid                13077  0
soundcore              14635  1 snd
snd_page_alloc        14108  2 snd_hda_intel,snd_pcm
vhba                  17151  0
lp                    17455  0
parport                40930  3 parport_pc,ppdev,lp
dm_raid45              76451  0
xor                    25987  1 dm_raid45
dm_mirror              21822  0
dm_region_hash        16065  1 dm_mirror
dm_log                18193  3 dm_raid45,dm_mirror,dm_region_hash
btrfs                638208  0
zlib_deflate          26622  1 btrfs
libcrc32c              12543  1 btrfs
usbhid                41906  0
hid                    77367  1 usbhid
firewire_ohci          40172  0
firewire_core          56906  1 firewire_ohci
crc_itu_t              12627  1 firewire_core
atl1                  36136  0
pata_jmicron          12651  0
floppy                60310  0
zram                  18193  1

Di solito non avvio il pc con la scheda già collegata perchè ci metterebbe un paio di minuti in più ad avviarsi.
Quella interna non l'ho mai disabilitata perchè mi serve e non saprei come fare tra l'altro.

Il device non viene caricato correttamente nel kernel, lo vedi da quel "audit_printk_skb: 42 callbacks suppressed". Potrebbe essere un problema delle regole di udev.

Se osservi i messaggio di un kernel funzionante dovresti ricevere qualcosa tipo:

Codice:

usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: config 1 interface 1 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 9
usb 2-1: New USB device found, idVendor=0644, idProduct=800e
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1: Product: US-122L
usb 2-1: Manufacturer: TASCAM
usb 2-1: SerialNumber: no serial number
usb 2-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver snd-usb-us122l

IL PC è un fisso o un portatile (dal dmesg sembra un portatile)? Hai collegato la scheda ad un hub usb o ad una porta "libera"?

Ciao,
Touch.

touchstyle ha scritto:

IL PC è un fisso o un portatile (dal dmesg sembra un portatile)? Hai collegato la scheda ad un hub usb o ad una porta "libera"?

Ciao,
Touch.

E' un fisso. E collego la scheda su una porta usb libera.